GPS | GNSS Amplifiers are used to boost the power level of the signal from an antenna. This is to overcome signal loss in coaxial cable runs and any passive components, such as splitters or combiners, enabling longer cable distances between the active antenna on the roof and the receiver or repeater inside the building.

A11 - GNSS in-line 30dB Amplifier

A11 GPS, Galileo, GLONASS Amplifier is an in-line one input / output RF device frequently used in the amplification of the GPS signal before 15dB of cable or other RF device loss. The A11 features 30dB of Gain and a noise figure of less than 1.8dB.

A114M - GNSS in-line 40dB Amplifier

Designed with thin link margins of satellite navigation systems in mind, the A114 amplifier is a single stage gain block in a small form factor that covers the GPS, Galileo, and GLONASS frequencies. The device features 40dB gain and a noise figure less than 2dB.

A11M - GNSS in-line 30dB Amplifier

The A11M mini amplifier is a single stage gain block covering GPS, Galileo and GLONASS frequencies. A11M features 30.0dB of gain and a noise figure of less than 1.8dB.

LA20FPDC GPS L1/L2 20dB Filtered Line Amplifier

GPS Networking LA20FPDC GPS Filtered Line Amplifier is a one input, one output device with a 20dB minimum gain block and L1/L2 filtering with frequency response covering both GPS L1 & L2 bands. In the standard configuration, the RF output (J1) passes DC from the connected GPS receiver through the amplifier to the antenna, allowing the GPS receiver to power both the antenna and the amps.

LA20RPDC GPS L1/L2 20dB Standard Line Amplifier

The LA20RPDC GPS Line Amplifier from GPS Networking is a one input, one output device with a 20dB min gain block. The frequency response covers Galileo, GLONASS and the GPS L1 & L2 bands with excellent flatness.

LA25RPDC GPS/GLONASS/Galileo 30dB Line Amplifier

The LA25RPDC is a one input, one output device with a nominal 25dB gain block. The frequency response covers Galileo, GLONASS and the L1, L2, L5 GPS bands with excellent flatness. In the default configuration, the RF output (J1) passes DC from the connected GPS receiver through the amplifier to the active antenna, allowing the GPS receiver to power both the antenna and the LA25RPDC amplifier.

LA30RPDC GPS/GLONASS/Galileo 30dB Line Amplifier

The LA30RPDC is a one input, one output device with a nominal 30dB gain block. The frequency response covers Galileo, GLONASS and the L1, L2, L5 GPS bands with excellent flatness. In the default configuration, the RF output (J1) passes DC from the connected GPS receiver through the amplifier to the active antenna, allowing the GPS receiver to power both the antenna and the LA30RPDC amplifier.

MLA20RPDC Mini GPS/GLONASS/Galileo 20dB Line Amplifier

GPS Networking’s MLA20RPDC mini GPS Line Amplifier is a one input, one output device with a 20dB minimum gain block, covering the GPS L1/L2 and GLONASS bands with excellent gain flatness.  MLA20RPDCis available with BNC, N, SMA or TNC connectors. Weather proofing is also available.

VGLCDLA30RPDC Variable Gain Amplifier

VGLCDLA30RPDC features a variable gain range from 0 to 30dB with an LCD display and push button controls in 1dB increments. The frequency response covers the GPS L1/L2/L5, Galileo and GLONASS bands with excellent flatness throughout the attenuation range.

GLI Metro G Smart Amplifier

The GLI-METRO-G will receive and control output strength based on GPS+GLONASS, GLONASS only or GPS only selection.

MA11M Military Grade Amplifier

The MA11M military grade amplifier from GPS Source strengthens the signal and reach of a GPS device.  Ideal in situations where the signal is weak, MA11M works with an external active antenna and is primarily used by both ground and air military applications and is also ideal for applications and environments that require high reliability.