GNSS/GPS Splitters
| S12-1x2 Standard GPS Splitter The S12 GPS Splitter is a one-input, two-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units. In this scenario, the S12 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second RF output would feature a 200 Ohm DC load to simulate an antenna DC current draw for any receiver connected to that port. more» |
![]() |
| LDCBS1X2 Antenna Splitter The LDCBS1X2 antenna splitter is a one input two output power divider designed specifically for the GPS L1, L2 & GLONASS carrier frequencies. more» |
|
| S12S-1x2 Slimline GPS Splitter The S12S GPS Splitter is a one-input, two-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units. In this scenario, the S12 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second RF output would feature a 200 Ohm DC load to simulate an antenna DC current draw for any receiver connected to that port. more» |
![]() |
| LDCBS1X4 Antenna Splitter The LDCBS1X4 antenna splitter is a one input four output power divider designed specifically for the GPS L1, L2 & GLONASS carrier frequencies. more» |
|
| S14-1x4 Standard GPS Splitter The S14 GPS, Galileo, GLONASS Splitter is a one input four output RF device. The S14 is available with more options than any comparable product available. The most common application is the input from an active GPS roof antenna or GPS simulator is equally split to four receiving GPS units. more» |
|
| MIL-NLDCBS1X3 GPS Antenna Splitter The MIL-NLDCBS1X3 antenna splitter is a one input three output power divider designed specifically for the GPS L1 & L2 carrier frequencies. more» |
|
| S14S-1x4 Slimline GPS Splitter The S14 GPS, Galileo, GLONASS Splitter is a one input four output RF device. The S14 is available with more options than any comparable product available. The most common application is the input from an active GPS roof antenna or GPS simulator is equally split to four receiving GPS units. more» |
|
| ALDCBS1X2 GPS Amplified Antenna Splitter The ALDCBS1X2 antenna splitter is a one input two output amplified power divider designed specifically for the GPS L1, L2 & GLONASS carrier frequencies. more» |
![]() |
| S14WI-1x4 Wireless GPS Splitter The S14WI is designed to meet the demanding, high reliability requirements of the wireless infrastructure market. The cost of multiple antennas and long cable runs in wireless base stations is eliminated. The S14WI can be configured to monitor the GPS antenna current, providing an alarm indication if the antenna is not operating according to specifications. The S14WI features an optional DC bias "Pick & Choose" circuit which allows for the active antenna DC input to be appied to any or all of the RF outputs. The S14WI is available with more options than any competitive product on the market. more» |
|
| ALDCBS1X4 Amplified Antenna Splitter The ALDCBS1X4 antenna splitter is a one input four output amplified power divider designed specifically for the GPS L1 & L2 carrier frequencies. more» |
![]() |
| S18-1x8 Standard GPS Splitter The S18 GPS, Galileo, GLONASS Splitter is a one input eight output RF device. The most common application is where the input from an active GPS roof antenna or GPS simulator is split to eight receiving GPS units. The S18 is available with more customizable options than any competitive product on the market. more» |
|
| ALDCBS1X8 Amplified Antenna Splitter The ALDCBS1X8 antenna splitter is a one input eight output amplified power divider designed specifically for the GPS L1/ L2 & GLONASS carrier frequencies. more» |
![]() |
| RMS18-1x8 Rack Mount GPS Splitter The RMS18 GPS/Galileo/GLONASS Splitter is a one input eight output rack mount RF device. The most common use being the input from an active GPS roof antenna or GPS simulator is split to eight receiving GPS units or timing boards. Rack mounts are commonly used by cellular, timing, and test labs utilizing GPS. The RMS18 can fit into existing 19 inch rack mount solutions making it ideal for most infrastructure. more» |
|
| GPS Active Splitters Symmetricom's Active Splitters allow multiple GPS receivers to share a single antenna. more» |
![]() |
| RMS116-1x16 Rack Mount GPS Splitter The RMS116 GPS/Galileo/GLONASS Splitter is a 1-input 16-output rack mount RF device. The most common use being the input from an active GPS roof antenna or GPS simulator is split to sixteen receiving GPS units or timing boards. Rack mounts are commonly used by cellular, timing, and test labs utilizing GPS. The RMS116 is available with more options than other competitive products. more» |
|
RMS132-1x32 Rack Mount GPS Splitter |
|
| BT1-GPS Bias Tee The BT1 GPS Bias Tee provides in-Line voltage in either or both directions. The BT1 bias tee will not affect the AC or RF transmission through the coaxial cable. The BT1 is designed to the highest level quality standards and optimized for military applications. more» |
|
| C21-Standard GPS Combiner 2 Inputs The C21 GPS/Galileo/GLONASS Combiner is a two-input one-output RF device. The most common application is taking input from two GPS antennas and combining the signal to one receiving GPS unit. In this scenario, the C21 will pass DC from the RF output to both antenna input ports (J1 & J2) in order to power the active GPS antennas on those ports. more» |
|
| C21S Slimline GPS Combiner 2 Inputs The C21S GPS/Galileo/GLONASS Combiner is a two-input one-output RF device. The most common application is taking input from two GPS antennas and combining the signal to one receiving GPS unit. In this scenario, the C21 will pass DC from the RF output to both antenna input ports (J1 & J2) in order to power the active GPS antennas on those ports. more» |
|


















