GNSS/GPS Re-Radiating Kit
Chronos’ GPS reradiating/repeater solutions enable military personnel to use and test GPS navigation systems while inside vehicles, aircraft, helicopters, hangars, buildings or bunkers by amplifying and rebroadcasting the weak GPS signal into the enclosed environment. GPS re-radiators enable continuous operation, giving military personnel immediate location information which is particularly important for situations such as tactical infantry deployment in hostile environments.
| GPSRKL1 - L1 Repeater Kit The GPSRKL1 Repeater kit is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL1 is available with more customizable options than any competitive product on the market. more» |
![]() |
CT-5010 Portable GPS Reradiator Solution |
![]() |
| GPSRKL12 - L1/L2 GPS Repeater Kit The GPSRKL12 Repeater kit is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL12 is available with more options than any competitive product in the market. Please select your standard or custom repeater here on-line via the link below. Select the link to the left below the product photo to place an order or request a quote for standard or customized S12 splitters. more» |
|
GPS Re-Radiating Kit Installation Service |
|
| GPSRKL12G - L1/L2 Glonass Repeater Kit The GPSRKL12G Repeater kit is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL12G is available with more options than any competitive product in the market. more» |
|
| GPS HNRRKIT The HNRRKIT is a complete re-radiating system to allow you to re-radiate the GPS L1 carrier indoors. more» |
|
| GPSRKL12O - Omnistar Repeater L1/L2 Repeater The GPSRKL12O Repeater kit is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL12O is available with more options than any competitive product in the market. more» |
|
| GPS PNRRKIT The PNRRKIT is a Re-radiating system which allows you to re-radiate the GPS L1 carrier indoors. more» |
|
| GPS L1RRKIT1X2 The L1RRKIT1X2 is a Re-radiating system which allows you to re-radiate the GPS L1 carrier indoors. more» |
|
| GPSRKL125 - L1/L2 & L5 Glonass Repeater The GPSRKL12G Repeater kit is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL12G is available with more options than any competitive product in the market. more» |
|
| GPS L1/L2 HNRRKIT The L1/L2 HNRRKIT is a complete Re-radiating system to allow you to re-radiate the GPS L1/L2 carrier indoors. more» |
|
GPSRKXLV - GPS Gain Control Amplifier Kit |
|
| GPS L1/L2 PNRRKIT The L1/L2PNRRKIT is a Re-radiating system which allows you to re-radiate the GPS L1/L2 carrier indoors. more» |
|
Military Aircraft and/or Ground Repeater Kits |
|
| GLI-Air GLI-Air is a roll on/roll off or permanent system that provides a GPS signal throughout the entire cargo bay of a small aircraft. Engineered for easy installation and operation, (including a pictorial user manual). Includes combat proven core technology that will stand up to rugged mission demands. Adjustable active GPS antenna mount allows pilots to choose antenna location. Military style connectors to prevent breakage and failure. "Built-in” repeater antenna is designed to protect the antenna and keep it from catching on cargo or soldiers. more» |
![]() |
| GLI-Air2 GLI-Air 2 is a roll on/roll off or permanent system that provides a GPS signal throughout the entire cargo bay of a small or mid-sized military aircraft. Engineered for easy installation and operation, (including a pictorial user manual). Includes combat proven core technology that will stand up to rugged mission demands. Adjustable active GPS antenna mount allows pilots to choose antenna location. Military style connectors to prevent breakage and failure. "Built-in” repeater antenna is designed to protect the antenna and keep it from catching on cargo or soldiers. more» |
![]() |
| GLI-HMMWV - make your handheld GPS work inside the HMMWV GLI-HMMWV provides GPS coverage for the High Mobility Multi-purpose Wheeled Vehicles. This means carry-on military and commercial GPS receivers will get satellite signals inside the HMMWV. Soldiers have satellite connectivity and situational awareness prior to dismounting the vehicle. A GPS receiver will experience no loss in signal coverage as it moves out of a HMMWV or LAV when equipped with GPS Live Inside. more» |
|
| GLI-MRAP - handheld GPS will work inside MRAP GLI-MRAP provides GPS coverage for the Mine Resistant Ambush Protected vehicle. This means carry-on military and commercial GPS receivers will get satellite signals inside the MRAP. Soldiers have satellite connectivity and situational awareness prior to dismounting the vehicle. A GPS receiver will experience no loss in signal coverage as it moves out of a MRAP or LAV when equipped with GPS Live Inside. more» |
![]() |
| GLI-SOF - RECEIVE GPS SIGNAL INSIDE VEHICLE OR AIRCRAFT GLI-SOF provides GPS coverage within any aircraft or ground vehicle. This means any handheld military or commercial GPS receivers, precision air drop guidance units and military free fall receivers acquire satellite signals inside the aircraft or ground vehicle. The warfighter will have satellite connectivity and situational awareness prior to dismounting a vehicle or exiting an aircraft. A GPS receiver will experience no loss in signal coverage as it moves in or out of any vehicle equipped with GPS Live Inside. more» |
|
| GLI-STRYKER - make handheld GPS work inside Stryker GLI-STRYKER provides GPS coverage within the mission module of the Stryker Family of Armored Vehicles. This means carry-on military and commercial GPS receivers will get satellite signals inside Stryker and other variants of the LAV family. Soldiers have satellite connectivity and situational awareness prior to dismounting the vehicle. With GLI-Stryker, delays in acquiring GPS position are a thing of the past. A GPS receiver will experience no loss in signal coverage as it moves out of a Stryker or LAV when equipped with GPS Live Inside. more» |
|
Military GPS Repeaters |
|
| GPSRKL1M - Military/Commercial Mobile L1 Repeater The GPSRKL1M is a GPS L1 low power repeater system designed specifically for rugged, mobile military environments. The repeated GPS signal is used for system test and initialization. The GPSRKL1M is available with more options than any competitive product in the market. The product features a military style cannon plug connector for DC power, and comes with a waterproof enclosure with the option to EMI proof the enclosure as well. The GPSRKL1M also features custom gain options to ensure a radiated power level that covers only the required area. more» |
![]() |
Repeater Hood |
|
| GPSRHL15 - GPS 5" Antenna Hood Complete end-to-end testing of GPS systems must, by definition, include the application?s receiving antenna. GPS Repeaters are a viable option where potential interference issues are not a concern. When a GPS Repeater is not an option, a viable and cost effective solution is the GPS Source Antenna Hood. At a fraction of the cost of a full blown screen room or chamber, the GPS Source Antenna Hood (GPSRH) will supply your application?s receive antenna with the necessary GPS signals. Operating in conjunction with an outdoor active antenna and a coaxial cable (cable type and length may be determined for appropriate signal loss), the GPS Source Antenna Hood with the power option will supply the necessary DC voltage to power the antenna and, with the 0-30dB Variable Attenuator option, provide a variable signal level to the application under test. more» |
![]() |
| GPSRHL18 - GPS 8.75" Antenna Hood Complete end-to-end testing of GPS systems must, by definition, include the application?s receiving antenna. GPS Repeaters are a viable option where potential interference issues are not a concern. When a GPS Repeater is not an option, a viable and cost effective solution is the GPS Source Antenna Hood. At a fraction of the cost of a full blown screen room or chamber, the GPS Source Antenna Hood (GPSRH) will supply your application?s receive antenna with the necessary GPS signals. Operating in conjunction with an outdoor active antenna and a coaxial cable (cable type and length may be determined for appropriate signal loss), the GPS Source Antenna Hood with the power option will supply the necessary DC voltage to power the antenna and, with the 0-30dB Variable Attenuator option, provide a variable signal level to the application under test. more» |
![]() |
Filtered Repeaters |
|
GPSRKXL1 - GPS filtered repeater assembly |
|
| GPSRKXL12 - GPS filtered repeater assembly The GPSRKXL12 filtered GPS repeater assembly. The GPS, Galileo, GLONASS Amplifier is an in-line one input one output RF device. For standard and customized GPSRKXL12 product quotes and ordering information, select the link below the photo or call, fax, or email sales@gpssource.com today. We can also answer any questions regarding product pricing, customized options, specifications, or technical support issues. more» |
|
HNRRKIT Accessories |
|
| Portable EMC Test Chamber Enabling low cost, easily deployable EMI shelter which can be used in a variety of locations, giving high levels of shielding due to the innovative design of the door. Available in a range of sizes and features, the shelter can be made to your exact needs. more» |
![]() |
| L1 Roof Antenna Mounting Bracket L1/L2 Roof Antenna Mounting Bracket. |
![]() |
|
Re-Radiating Amplifier Mount Universal mount for indoor installation of Re-Radiating Amplifier and Antenna. |
![]() |
| Low Loss RF Cable Assembly Cables and connectors, choose from 10m, 20m or 30m with N type connectors. more» |
|
GPS Reradiating Installation Capabilities from Chronos

Chronos provides a full GPS reradiating installation service for military applications from designing the layout and installation of the solution through to comprehensive after sales support.
Download the PDF»

















