GPS / GNSS Repeaters (also known as GPS Re-radiators) can be used in your operation to improve efficiency during testing and lower costs by bringing a GPS / GNSS signal indoors. Following the recent Ofcom ruling on the licensing of GPS repeaters in the 1164-1215 MHz, 1215-1300 MHz, and 1559-1610 MHz frequency bands, we are pleased to offer a selection of components and kits to build a fully functional re-radiator system. Please note the components themselves are not compliant with the licensing regime, unless installed to Ofcom’s specifications. For help on installation best practice, product selection or to arrange a site survey, please contact us on +44 (0)1594 862200.

For more information on how a GPS repeater improved efficiency and productivity in a shipment tracking situation click here»

	L1 GPS Repeater Kit with Variable Gain - VGHNRRKIT The GPS Variable Gain Hangar Re-Radiating Kit (VGHNRRKIT) is a complete re-radiating system that allows re-radiation of the GPS L1 signal indoors. The VGHNRRKIT consists of an active roof antenna, a re-radiating amplifier with a variable gain knob that allows for easy gain adjustment from -3dB to 23dB, a wall mount plug-in transformer that powers the entire system, and an L1 passive re-radiating antenna.
	L1/L2 GPS Repeater Kit with Variable Gain - VGL1/L2HNRRKIT The GPS Variable Gain L1/L2 Hangar Re-Radiating Kit (VGL1/L2HNRRKIT) is a complete re-radiating system that allows re-radiation of the GPS L1 and L2 signals indoors. The VGL1/L2HNRRKIT consists of an active roof antenna, a re-radiating amplifier with variable gain, a wall mount plug-in transformer that powers the entire system, and a passive L1/L2 re-radiating antenna.
	L1/L2/L5 GPS Galileo/Glonass/OmniStar Repeater kit with Variable Gain - VGL1/L2GHNRRKIT The GPS L1/L2/L5 Galileo/GLONASS/Omnistar Hangar Networked Re-Radiating Kit (L1/L2GHNRRKIT) is a complete re-radiating system that allows re-radiation of the GPS L1, L2, L5, Galileo, GLONASS and Omnistar signals indoors.
	L1/L2 GPS Repeater Kit - L1/L2HNRRKIT The L1/L2 HNRRKIT is a complete Re-radiating system to allow you to re-radiate the GPS L1/L2 carrier indoors.
	L1 GPS Repeater Assembly - GPSRKL1 The GPSRKL1 Repeater assembly is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL1 is available with more customizable options than any competitive product on the market.
	L1/L2 GPS Repeater Assembly - GPSRKL12 The GPSRKL12 Repeater kit is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration.
	L1/L2 GPS/Glonass Repeater Assembly -  GPSRKL12G The GPSRKL12G Repeater kit is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL12G is available with more options than any competitive product in the market.
	L1/L2 & L5 GPS/Glonass/OmniSTAR Repeater Assembly - GPSRKL125GO The GPSRKL125GO Repeater kit is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL125GO is available with more options than any competitive product in the market.
	GPS L1 Repeater Set (no active antenna) PNRRKIT The GPS Portable Re-Radiating Kit (PNRRKIT) is a re-radiating system that allows re-radiation of the GPS L1 signal indoors. The PNRRKIT consists of a re-radiating amplifier with a wall mount plug-in transformer that powers the entire system, and a passive L1 re-radiating antenna.
	L1/L2 GPS Repeater Set with Variable Gain (no active antenna) - VGL1/L2PNRRKIT The Variable Gain L1/L2 GPS Portable Re-Radiating Kit (VGL1/L2PNRRKIT) is a re-radiating system that allows re-radiation of the GPS L1 & L2 signals indoors. The VGL1/L2PNRRKIT consists of a re-radiating amplifier with variable gain, a wall mount plug-in transformer that powers the entire system and a passive L1/L2 re-radiating antenna. The GPS L1 & L2 signal from the roof antenna is amplified, adjusted as necessary with the pot range control and radiated indoors. Thus, if a receiver has line of sight with the re-radiating antenna, it can receive the GPS signal indoors up to 100 feet away.
	GLI MetroE CE Certified Smart Amplifier The only smart amplifier that is CE certified. The GLI-METROe marks the integration of the latest GPS retransmission technology into a simple, self-contained unit. The GLI-METROe employs an automatic control to maintain the set output signal level.
	L1 GPS MetroE Repeater Kit with cable - GLI-HangarM GLI-Hangar allows ongoing installation, testing and troubleshooting of aircraft GPS navigation systems inside the hangar. Delays of maintenance due to inclement weather or the placement of other aircraft is eliminated. Maintenance efficiencies can be immediately recognized, as accessibility to work on the GPS navigation becomes more convenient. Personnel and assets can be protected, plus time and fuel can be saved using GLI-Hangar.
	GPS 5" Antenna Hood - GPSRHL15 Complete end-to-end testing of GPS systems must, by definition, include the application?s receiving antenna. GPS Repeaters are a viable option where potential interference issues are not a concern. When a GPS Repeater is not an option, a viable and cost effective solution is the GPS Source Antenna Hood. At a fraction of the cost of a full blown screen room or chamber, the GPS Source Antenna Hood (GPSRH) will supply your application?s receive antenna with the necessary GPS signals.
	GPS 8.75" Antenna Hood - GPSRHL18 Complete end-to-end testing of GPS systems must, by definition, include the application?s receiving antenna. GPS Repeaters are a viable option where potential interference issues are not a concern. When a GPS Repeater is not an option, a viable and cost effective solution is the GPS Source Antenna Hood. At a fraction of the cost of a full blown screen room or chamber, the GPS Source Antenna Hood (GPSRH) will supply your application?s receive antenna with the necessary GPS signals.
	CT-5010 Portable GPS Reradiator Solution The portable L1/L2 GPS Reradiator from Chronos is a high performance, rugged, self contained solution designed for rapid deployment in a variety of military environments such as aircraft, helicopters, hangers, bunkers, armoured fighting vehicles, field deployable solutions and infantry readiness.