GNSS Repeaters

GPS World News

Chronos announces the UK availability of CAST Navigation’s smallest fully capable GPS Satellite Simulator - Tuesday, 15 May 2012 00:00

Chronos announces partnership with SEQ|TOR to distribute the J-ALERT Jamming Detector product in the UK - Wednesday, 25 April 2012 00:00

Charles Curry is awarded Honorary Professorship from the University of Bath - Monday, 23 April 2012 00:00

Septentrio partnership delivers first Galileo Public Regulated Service Signal Reception - Wednesday, 04 April 2012 13:28

eLORAN and UrsaNav: Timing Is Everything - Wednesday, 14 March 2012 00:00

GPS World Products

GNSS Repeaters

	GLI Metro The GLI-METRO marks the integration of the latest GPS Amplifier technology into a simple, self-contained unit. With this smart amplifier, the user has precise control over effective radiated power (ERP) levels. This is regardless of the uncertain loss or gain in the receive antenna cable network.
	GLI MetroE The only smart amplifier that is CE certified. The GLI-METROe marks the integration of the latest GPS retransmission technology into a simple, self-contained unit. The GLI-METROe employs an automatic control to maintain the set output signal level.
	GLI-HangarM GLI-Hangar allows ongoing installation, testing and troubleshooting of aircraft GPS navigation systems inside the hangar. Delays of maintenance due to inclement weather or the placement of other aircraft is eliminated. Maintenance efficiencies can be immediately recognized, as accessibility to work on the GPS navigation becomes more convenient. Personnel and assets can be protected, plus time and fuel can be saved using GLI-Hangar.
	GPS HNRRKIT The GPS Hanger Re-Radiating Kit (HNRRKIT) is a complete re-radiating system that allows re-radiation of the GPS L1 signal indoors. The HNRRKIT consists of an active roof antenna, a re-radiating amplifier with a wall mount plug-in transformer that powers the entire system, and a passive re-radiating antenna.
	GPS L1/L2 GHNRRKIT The GPS L1/L2/L5 Galileo/GLONASS/Omnistar Hanger Networked Re-Radiating Kit (L1/L2GHNRRKIT) is a complete re-radiating system that allows re-radiation of the GPS L1, L2, L5, Galileo, GLONASS and Omnistar signals indoors.
	GPS L1/L2 HNRRKIT The L1/L2 HNRRKIT is a complete Re-radiating system to allow you to re-radiate the GPS L1/L2 carrier indoors.
	GPS L1/L2 VGHNRRKIT The GPS Variable Gain L1/L2 Hanger Re-Radiating Kit (VGL1/L2HNRRKIT) is a complete re-radiating system that allows re-radiation of the GPS L1 and L2 signals indoors. The VGL1/L2HNRRKIT consists of an active roof antenna, a re-radiating amplifier with variable gain, a wall mount plug-in transformer that powers the entire system, and a passive L1/L2 re-radiating antenna.
	GPS PNRRKIT The GPS Portable Re-Radiating Kit (PNRRKIT) is a re-radiating system that allows re-radiation of the GPS L1 signal indoors. The PNRRKIT consists of a re-radiating amplifier with a wall mount plug-in transformer that powers the entire system, and a passive L1 re-radiating antenna.
	GPSRHL15 - GPS 5" Antenna Hood Complete end-to-end testing of GPS systems must, by definition, include the application?s receiving antenna. GPS Repeaters are a viable option where potential interference issues are not a concern. When a GPS Repeater is not an option, a viable and cost effective solution is the GPS Source Antenna Hood. At a fraction of the cost of a full blown screen room or chamber, the GPS Source Antenna Hood (GPSRH) will supply your application?s receive antenna with the necessary GPS signals.
	GPSRHL18 - GPS 8.75" Antenna Hood Complete end-to-end testing of GPS systems must, by definition, include the application?s receiving antenna. GPS Repeaters are a viable option where potential interference issues are not a concern. When a GPS Repeater is not an option, a viable and cost effective solution is the GPS Source Antenna Hood. At a fraction of the cost of a full blown screen room or chamber, the GPS Source Antenna Hood (GPSRH) will supply your application?s receive antenna with the necessary GPS signals.
	GPSRKL1 L1 Repeater Assembly The GPSRKL1 Repeater assembly is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL1 is available with more customizable options than any competitive product on the market.
	GPSRKL12 L1/L2 Repeater Kit The GPSRKL12 Repeater kit is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration.
	GPSRKL125 L1/L2 & L5 Glonass Repeater The GPSRKL12G Repeater kit is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL12G is available with more options than any competitive product in the market.
	GPSRKL12G L1/L2 Glonass Repeater Kit The GPSRKL12G Repeater kit is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL12G is available with more options than any competitive product in the market.
	GPSRKL12O Omnistar L1/L2 Repeater The GPSRKL12O Repeater kit is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL12O is available with more options than any competitive product in the market.
	GPSRKL1M Military/Commercial Mobile L1 Repeater The GPSRKL1M is a GPS L1 low power repeater system designed specifically for rugged, mobile military environments. The repeated GPS signal is used for system test and initialization. The GPSRKL1M is available with more options than any competitive product in the market.
	L1/L2 GPNHNRRKIT Repeater The L1/L2 PNRRKIT is a portable network re-radiating kit that comes standard with a plug-in Re-radiating amplifier and a re-radiating antenna. It does not include an active L1/L2 roof antenna. The standard configuration does not provide source voltage to an active antenna but it may be specified. For Example: L1/L2PNRRKIT-N/110 is the standard configuration but it may also be ordered as an L1/L2PNRRKIT-N/110/5 which would send 5vdc to power an active antenna. The signal from the roof antenna is amplified and radiated out the Re-radiating antenna. If the GPS Receiver has line of sight with the Re-radiating antenna, it will receive the signal up to 100+ feet away.
	L1/L2 VGPNHNRRKIT The Variable Gain L1/L2 GPS Portable Re-Radiating Kit (VGL1/L2PNRRKIT) is a re-radiating system that allows re-radiation of the GPS L1 & L2 signals indoors. The VGL1/L2PNRRKIT consists of a re-radiating amplifier with variable gain, a wall mount plug-in transformer that powers the entire system and a passive L1/L2 re-radiating antenna. The GPS L1 & L2 signal from the roof antenna is amplified, adjusted as necessary with the pot range control and radiated indoors. Thus, if a receiver has line of sight with the re-radiating antenna, it can receive the GPS signal indoors up to 100 feet away.
	VGHNRRKIT Gain Hanger Re-Radiating Kit The GPS Variable Gain Hanger Re-Radiating Kit (VGHNRRKIT) is a complete re-radiating system that allows re-radiation of the GPS L1 signal indoors. The VGHNRRKIT consists of an active roof antenna, a re-radiating amplifier with a variable gain knob that allows for easy gain adjustment from -3dB to 23dB, a wall mount plug-in transformer that powers the entire system, and an L1 passive re-radiating antenna.