GPS World Products
Combiners
 |
C21 - Standard GPS Combiner 2 InputsThe C21 GPS/Galileo/GLONASS Combiner is a two-input one-output RF device. The most common application is taking input from two GPS antennas and combining the signal to one receiving GPS unit. In this scenario, the C21 will pass DC from the RF output to both antenna input ports (J1 & J2) in order to power the active GPS antennas on those ports. |
 |
C21S - Slimline GPS Combiner 2 InputsThe C21S GPS/Galileo/GLONASS Combiner is a two-input one-output RF device. The most common application is taking input from two GPS antennas and combining the signal to one receiving GPS unit. In this scenario, the C21 will pass DC from the RF output to both antenna input ports (J1 & J2) in order to power the active GPS antennas on those ports. |
 |
CPDC2X1 GPS CombinerThe CPDC2X1 GPS Combiner is a two input, one output device based on the Wilkinson splitter design. The frequency response covers the GPS L1 & L2 bands with excellent gain flatness. In the normal configuration, all of the splitter RF outputs pass DC from the connected GPS receiver through the splitter to the antenna. |
 |
CPDC4X1 GPS CombinerThe CPDC4X1 GPS Combiner is a four input, one output RF device. The frequency response covers the GPS L1, L2, L5 and Galileo/GLONASS bands with excellent gain flatness. In the standard configuration, all 4 input ports (Labelled Antenna 1, Antenna 2, Antenna 3 and Antenna 4) will pass DC from the Output Port to the connected GPS receiver to allow one receiver to power all 4 active antennas. |